1121 Marcus Street
 Fairmont, MN 56031
 Phone/Fax:  1.507.238.4141
 Email Owner:  Tim Meyer
 Shop Hours:  M-F 8-5 CST		   TMeyer, Inc. - Precision Automotive Machining

 

Precision Automotive Machining


























İTMeyer, Inc. 2003.
All rights reserved.

400 Ford

Pistons and 

400 Ford Pistons 

Pictured from left to right:
Hypereutectic Custom piston,
Hyper. Piston machine for Aussie Heads (32cc) 9.5:1,
Badger Flat Top Piston,
Hyper. Piston machine for stock heads (12cc) 9.5:1,
Stock OEM piston.

You can see the difference in the heights. On the left, Hypereutectic Custom pistons. The Badger 40010F piston in the middle is .015" shorter than the stock OEM piston on the right.

Hypereutectic Custom, Badger 40010F, Stock OEM

Compression height: +/- .001"
Hyper's 1.722"
OEM 1.655"
Badger 1.637"

Special Hypereutectic Flat Top 400 Ford Pistons

10-10.5:1 Compression Ratio

  

       Badger 40010F Piston $150             Difference in Height

      9-9.5:1 Compression Ratio                Stock vs. Hyper.

The photos above show the pistons at Top Dead Center.  At this point the piston is still .062" below the deck height.

Our special Badger piston on the left, on the right after machining

to achieve 32cc dish to use with 302 Aussie heads. 

TMeyer, Inc. ·  1121 Marcus Street · Fairmont, MN 56031 · 1.507.238.4141 · Email Tim (Owner)