Home > Engine Parts > Parts by Manufacture > Track Boss Products >

Track Boss Cleveland Block
Track Boss Cleveland Block


 
Alternative Views:



Product Code: TBP-TB9.2


2nd Free Track Boss T-shirt:


Free Track Boss T-Shirt size:


Qty:  
Description
 
CGI Iron blocks-$3999
Aluminum blocks-$6250
Plus any options...
Save %10 on the block when you order a shortblock or more.

***FREE shipping to a business address in the lower 48 states***

CGI block will weigh about #225
Aluminum will weigh about #105-#110
*** (2) FREE Track Boss T-shirts with every block purchased***

The Boss is Back!!

We have added extra material to make the mains solid. We have also added extra material for the 1-piece rear main seal. Even for those drag race guys, we have extra material for mounting a Chevy starter. There will still be some tweaking to do yet, but we have a great start. The first block will be our "guinea pig" Once we have done all of the machining, it will be sliced up and inspected for proper machining locations.

In the words of David Weiss, (President of R&D at Eck Industries, our foundry) "This will be the strongest block on the market"

Block externally looks very close to the OE block, we are making it a priority to maintain the original Cleveland block look.

Upgrades to the Track Boss Cleveland Block
*Solid bulk head
*Splayed flat bottom 4-bolt billet main caps
*1/2 & 7/16 studs included...
*1-piece rear main seal
*4.180"-4.200" potential bore size, CGI potential 4.230" or so.
*9.200", 9.350" & 9.500" maybe possible deck height to start with...
*With or without fuel pump provision
*Stock Cleveland, 55 & 60MM optional
*42/46 lifter angle-option
*Solid water jacket

Options coming down the road.
*"square" or "D" casting on timing cover-option
*302 main size-option
*option to change casting date & codes
*Lightening program for CGI

Track Boss Cleveland block- Iron
**Once the new order of aluminum casting are finished, a few tooling changes will be made for iron blocks. the major changes have been made, so the only changes that will be made is for the use with iron material.
**Similar to the first few aluminum blocks, we will have a couple sample block cast so we can machine and slice to again confirm castings.

We have a full time CNC machinist, so we are dedicated to producing our Track Boss product.
We appreciate your patience, we feel very confident that once everything is running & proven, we will be able to keep up with
demand. Foundry time line is the biggie that we will have to contend with.

We are very happy to announce that NHRA has approved the Iron Track Boss Cleveland Block for Stock & SS classes.
Also the iron block is approved for NMCA classes.




Share your knowledge of this product. Be the first to write a review »