Forum breadcrumbs - You are here:ForumMain Category: Track Boss Cleveland blockTrack Boss iron block sonic test. …
Track Boss iron block sonic test...4.200" bore potential?
#1 · June 10, 2022, 4:27 pm
Quote from Timothy Meyer on June 10, 2022, 4:27 pmTrack Boss iron block sonic test...The water jacket cores are almost dialed in perfectly...(as possible as a casting can be)Here we have a 4" bore, and our thinnest area is .265"So, in a 4.125" finished bore, we would still have a minimum of .200" cylinder wall thickness. If you want to go crazy with a 4.200" bore, you would still have a .165" wall thickness minimum. Our goal is to continue to work at getting the water jacket as center as possible.For more information, follow this link> https://www.tmeyerinc.com/pro.../track-boss-cleveland-block/
Track Boss iron block sonic test...
The water jacket cores are almost dialed in perfectly...(as possible as a casting can be)
Here we have a 4" bore, and our thinnest area is .265"
So, in a 4.125" finished bore, we would still have a minimum of .200" cylinder wall thickness. If you want to go crazy with a 4.200" bore, you would still have a .165" wall thickness minimum. Our goal is to continue to work at getting the water jacket as center as possible.
For more information, follow this link> https://www.tmeyerinc.com/pro.../track-boss-cleveland-block/
Click for thumbs down.0Click for thumbs up.1
WADKINS has reacted to this post.
WADKINS